Free India has to make payment of Rs.100 which will be adjustment while making final payment
Step 1:
Practical 1:
A.Place the card on display

Place either a driving license or any bank card(why?) , over the sample credit card image on your screen.

B.Resize card image

Click and drag button with two-sided arrow to resize card image, until card image exactly matches actual bank card placed on display. How it Works?!

Practical 2:
A.Find the matching circle
B.Click on your size
Measure Your Finger

Your ring should fit your finger comfortably; snug enough so that it will not fall off, but loose enough to slide over your knuckle. Finger size changes depending on time of the day and the weather, for better results:

1. Measure your finger at the end of the day and when your fingers are warm. (Fingers are smaller in the early morning and when cold.)

2. Measure your finger size 3 to 4 times to eliminate an erroneous reading.

Avoid using string or paper to measure ring size as these materials can stretch or twist, yielding an inaccurate measurement.

Practical 2:
IF YOU DON'T HAVE A RING

What you need: A thin stript of paper, a pen and a ruler

A. 1. Wrap a thin strip of paper around your finger.
B. 2. Mark the meeting point with a pen.
C. 3. Measure the length with a ruler.
You now have the circumference of your ring, use the following chart to determine your ring size.
Ring size(Indian) Circumference(In mm) Ring size(Indian) Circumference(In mm)
6 45.9 19 59.1
7 47.1 20 60.0
8 49.0 21 60.9
9 49.0 22 61.9
10 50.0 23 62.8
11 50.9 24 63.8
12 51.8 25 64.7
13 52.8 26 66.0
14 54.0 27 66.9
15 55.0 28 67.9
16 55.9 29 69.1
17 56.9 30 70.1
18 57.8

Pro tip: If your measurement falls between two ring sizes, it is recommended that you choose the larger size

Practical 3:
IF YOU HAVE A RING

What you need: A ring and a ruler.

Place the ring on the ruler.
Measure the larges distance between the inner edge of your ring.
Measure Current Ring

1. Select a ring that properly fits the intended finger.Engagement and wedding rings are traditionally worn on the ring finger on the left hand in the United States.

2. Place the ring over the circles to the right. Matching the inside edge of the ring to the circle nearest in size. This measurement refers to the inside diameter of the ring.

3. If the ring falls between two sizes, order the larger size.

You now have the circumference of your ring, use the following chart to determine your ring size.
Ring size(Indian) Circumference(In mm) Ring size(Indian) Circumference(In mm)
6 45.9 19 59.1
7 47.1 20 60.0
8 49.0 21 60.9
9 49.0 22 61.9
10 50.0 23 62.8
11 50.9 24 63.8
12 51.8 25 64.7
13 52.8 26 66.0
14 54.0 27 66.9
15 55.0 28 67.9
16 55.9 29 69.1
17 56.9 30 70.1
18 57.8

Pro tip: If your measurement falls between two ring sizes, it is recommended that you choose the larger size.

Practical 5:
Print ring sizer

Print ring instructions

Ensure page Scaling is set to 'None' in the printer dialogue box.

STEP 2:
Practical 6:
Request ring sizer(Recommended), most accurate takes 4-5 business days.
1. A basic of your approximate size as per step 1, we will courier to you few plastic rings for accurate size.
Tips
Temperature is important

Don't measure when your body temperature is either too cold or too hot. A cold finger shrinks while a hot finger expands causing an inaccurate reading. Only measure when fingers are at room temperature.

When two sizes seem to fit

If you hesitate between two sizes, always go with the larger one

A wider band needs a bigger size

If you consider purchasing a wide band, move up a size from your measurement, for comfort’s sake.

Don't use strings

When measuring your finger, always refrain from using a string, they tend to stretch, which can result in wrong size. ALWAYS use a paper strip about 1/2 width.

Big knuckles can affect your size

If your knuckle is a lot larger than the base of your finger, and you're using the virtual ruler, measure both the base of your finger and your knuckle and select a size in between the two.

Don't use strings

When measuring your finger, always refrain from using a string, they tend to stretch, which can result in wrong size. ALWAYS use a paper strip about 1/2 width.

Big knuckles can affect your size

If your knuckle is a lot larger than the base of your finger, and you're using the virtual ruler, measure both the base of your finger and your knuckle and select a size in between the two.

For best results, use a plain band

Extra wide band styles tend to run slightly small. If your borrowed ring has a narrower shaft than the one you wish to purchase, you may wish to order a ring a size larger than the normal size worn. Also, large stone rings may cause the shank to lift up when laid on its side on the display, slightly distorting the size measurements.

FAQ
1. Is there a difference between men sizes and women sizes?

Definitely no, there is no difference between men sizes and women sizes.

2. Why do I need to place my driving license or credit card on the display?

We use the card onlyl for its physical properties, specifically its width, which we use to calibrate the display

No identifying detail of your card is used or captured in any manner, hence you can use any card, as long as it is identical in size.

3. How do we create the ring scale and the virtual ruler?

After you tune your display using a card, we calculate the exact pixel size of your display, and create an image that fits specifically to your display.

After you tune your display using a card, we calculate the exact pixel size of your display, and create an image that fits specifically to your display.

On the lower right part of the ring scale page, and the virtual ruler page, you'll notice a signature that contains the technical data used to create the image.

The ring scale and the virtual ruler cannot be copied to other displays, since they won't show the accurate sizes.

4. How accurate is this method?

The method is highly accurate, much more than using a regular ruler.

Technically speaking, we calibrate the exact size of a pixel in metric scale. the calibration process resolution is 45 microns. Therefore, even if you miss by 10 pixels, when marking the card, you'll still get the correct size.

5. Is it possible to resize a ring?

Most jewelers will happily adjust a ring two sizes in either direction

This adjustment may leave a visible seam or an invisible weak point, but a professional jeweler can position flaws out of sight.

6. Do all jewelers use the same ring size scale?

Different countries have different ring size scales. For your convenience we created a ring size conversion table. Open our ring size conversion table...